1, the naming principle of plastic products Product Name = resin + main filler + basic name

Description: The basic name according to the product molding way to distinguish the pressure plastic and injection plastic.

Example: Phenolic wood powder plastic; phenolic wood powder injection plastic; phenolic glass fiber pressurized plastic.

2, paint, resin and glue products naming principles-Product name = Main Chemical components + basic name

Description: ① The name refers to the use or shape of the product, such as immersion paint, solvent-free immersion paint, covering paint, rubber cat paint, melt powder, silicon steel paint, enameled wire paint, pouring glue and so on. ② need to indicate the color of the paint, color written before the basic name. ③ dry paint, dry written in the basic name and color before.

Example: oily immersion paint; drunk acid drying red enamel; epoxy melting powder; rosin cheese pouring glue; epoxy solvent-free immersion paint.

3, the naming principle of diffuse fiber products product Name the main chemical component of the second lacquer + substrate + basic name

Description: The basic name refers to the product form, such as lacquer cloth, lacquer pipe, strapping belt and so on.

Examples: Asphalt drunken acid glass lacquer cloth; oily glass lacquer tube; polyvinyl vinegar glass; glass wire strapping belt.

4, mixed products of the name of the original m product name two resin + substrate + basic name

Description: ① basic name refers to the shape of the product, such as plate, tube, rod, pull copper foil board, anti-Corona Board, Magnetic Guide plate, wire winding pipe, drawing rod, etc.; ② coarse copper foil plate in front of the basic name to distinguish single-sided or double-sided copper foil; ③ ordinary laminate, tube, the name of the stick should be

Examples: phenolic laminated cardboard; epoxy phenolic laminated glass cloth tube; Phenolic paper single-sided copper foil plate; epoxy phenolic laminated glass cloth rod; Epoxy polyvinyl vinegar glass wire winding tube; epoxy cool glass drawing rod.

5, Mica products product naming principle product name two gum cat agent + reinforcement material + basic name

Description: ① This name refers to the product form, such as Mica Belt, Mica Board, Mica foil, mica tube, etc., ② Mica plate class, need to express the use of the basic name, characteristics, such as plastic mica Board, soft Mica Board, commutator Mica Board, Gasket MICA Board, etc., ③ in addition to dolomite, with powder mica, Gold Mica or scaly mica products shall be provided with powder, gold or scales, respectively, before the basic name.

Example: Alkyd glass cloud without belt; silicone Glass soft powder cloud payment belt; Alkyd paper mica foil; epoxy glass scaly mica belt.

6. Naming principles for film, cat belt and composite products

Thin Film Product name = Chemical Component + basic name

Adhesive Product name = substrate + base name

Compound Product name = Composition 1+ composition 2+...+ Basic name

Description: ① Basic name is film, adhesive, composite box; the name of ② adhesive belt and composite product is not listed as binder, but the paint of fabric substrate should be listed and written in front of the substrate; the arrangement of ③ composite products is a thin film or glass cloth a synthetic fiber paper.

Examples: polyester film; polyester film cat belt; silicone glass adhesive; silicone rubber adhesive belt; polyester film one insulated paper composite foil; polyimide film an aromatic polyamide paper composite foil.

7, electrical insulation materials according to the variety of product models: Electrical Insulating materials product models are based on four digits (add fifth digits if necessary), additional numbers or additional letters can be added according to the special needs of the product, but additional methods should be used as little as possible. Model graphic type of electrical insulating material product model from left to right the significance of your numbers:

The first digit, the broad category expressed in accordance with regulation 21st

Second digit, subcategories expressed in accordance with Regulation 22nd

The third digit, which indicates the product's reference work degree

The fourth digit and, if necessary, the fifth word of PO Plus. Represents the product symbol sequence number

Reference operating temperature for the third digit: 1-105℃;2-120℃;3-130℃;4–155℃;5-180℃;6-180℃ or above.

Mica product model is not attached to the number of self-mica products. The meaning of additional numbers: 11 powder mica products; 21 Gold mica products; 4-scales mica products.

Coated foil plate product sequence number, odd is single-sided copper foil, even for double-sided copper foil. If the product contains fungicides or mildew inhibitors, the letter ' T ' is finally attached to the type P7

Model Examples: 10,323 cyanamide alkyd impregnated paint; 2750 silicone glass lacquer tube; 3240 epoxy phenolic laminated glass cloth board; 4221 ammonia Cornerstone cotton plastic; 54,381 I epoxy glass powder cloud without belt; 6530 cool film Drunken acid glass cloth composite foil.

绝缘材料型号编制方法

1、塑料类产品的命名原则产品名称=树脂+主要填料+基本名称

说明:基本名称按产品成型方式区分压塑料与注塑料。

举例:酚醛木粉压塑料;酚醛木粉注塑料;酚醛玻璃纤维压塑料。

2、漆、树脂和胶类产品的命名原则——产品名称=主要化学组分+基本名称

说明:①鉴本名称指产品用途或形态，如浸演漆、无溶剂浸演漆、覆盖漆、胶猫漆，熔敷粉末、硅钢片漆、漆包线漆、浇注胶等。②需表明颜色的漆，颜色写在基本名称之前。③晾干漆，晾干写在基本名称及颜色之前。

举例:油性浸溃漆;醉酸晾干红瓷漆;环氧熔敷粉末;松香酪浇注胶;环氧无溶剂浸演漆。

3、漫演纤维制品类产品的命名原则   产品名称二漆的主要化学组分+底材+基本名称

说明:基本名称指产品形态，如漆布、漆管，绑扎带等。

举例:沥青醉酸玻璃漆布;油性玻璃漆管;聚醋玻璃板;玻璃丝绑扎带。

4、混合制品类产品的命名原M产品名称二树脂+底材+基本名称

说明:①基本名称指产品的形态，如板、管，棒、攫铜箔板、防电晕板、导磁板、丝绕管、引拔棒等;②粗铜箔板在基本名称前区别单面或双面铜箔;③普通层合板、管，棒的名称应在树脂和底材之间加“层合”。

举例:酚醛层合纸板;环氧酚醛层合玻璃布管;酚醛纸单面覆铜箔板;环氧酚醛层合玻璃布棒;环氧聚醋玻璃丝绕管;环氧聚酷玻璃引拔棒。

5、云母制品类产品的命名原则  产品名称二胶猫剂+补强材料+基本名称

说明:①本名称指产品形态，如云母带、云母板、云母箔、云母管等;②云母板类，需在基本名称前表示用途、特征，如塑型云母板、柔软云母板、换向器云母板、衬垫云母板等;③除用白云母外，用粉云母、金云母或鳞片云母的产品须在基本名称前分别加粉、金或鳞片。

举例:醇酸玻璃云毋带;有机硅玻璃柔软粉云付带;醇酸纸云母箔;环氧玻璃鳞片云母带。

6、薄膜、猫带和复合制品类产品的命名原则

薄膜产品名称=化学组分+基本名称

黏带产品名称=底材+基本名称

复合制品产品名称=组成1+组成2+…+基本名称

说明:①基本名称为薄膜、黏带，复合箱;②黏带和复合制品的名称不列黏合剂，但织物底材的漆应予列出并写在底材前面;③复合制品组成的排列顺序为薄膜一纸或玻璃布一合成纤维纸。

举例:聚酯薄膜;聚酯薄膜猫带;有机硅玻璃黏带;硅橡胶黏带;聚酯薄膜一绝缘纸复合箔;聚聚酰亚胺薄膜一芳香族聚酰胺纸复合箔。

7、电工绝缘材料按品种编制产品型号：电工绝缘材料产品型号以四位数字(必要时增加第五位数字)为基础编制，根据产品的特殊需要可增加附加数字或附加字母，但应尽量少采用附加方式。型号图型中电工绝缘材料产品型号自左至右各位数字的意义:

第一位数字，按第21条规定表示的大类

第二位数字，按第22条规定表示的小类

第三位数字，表示产品的参考工作沮度

第四位数字以及必要时埔加的第五位教字.表示产品品种顺序号

第三位数字的参考工作温度:1-105℃;2-120℃;3-130℃;4–155℃;5-180℃;6-180℃以上。

云母制品型号中不附加数字的为自云母制品。附加数字的意义:1一粉云母制品;2一金云母制品;4-鳞片云母制品。

覆钢箔板的产品顺序号，奇数为单面覆铜箔，偶数为双面覆铜箔。若含有杀菌剂或防霉剂的产品，在型P7最后附加字母‘T’

型号举例:1032三聚氰胺醇酸浸渍漆;2750有机硅玻璃漆管;3240环氧酚醛层压玻璃布板;4221氨基石棉压塑料;5438一I环氧玻璃粉云毋带;6530聚酷薄膜醉酸玻璃布复合箔。