The specific application of eco-friendly shrink ingress double wall tubes in wind turbines. First, let's look at what a turbine is.

Turbines are engines that generate power by turning the wheel with fluid impact. Can be divided into steam turbines, gas turbines and water turbines. Is widely used as a power generation, aviation, navigation and other power machines. The turbocharger is actually an air compressor that increases the amount of air intake by compressed air. It uses inertial force to increase the output power of the engine. Wind turbines are engines that use wind power to turn blades to generate electricity, at half the cost of conventional turbines.

Why wind turbines are used in environmentally friendly heat-shrinking double-wall tubes.

We all know that with the development of science and technology, people are more and more pursuit of refinement, from the big ass desktop computer to a few inches of notebook, from the former big brother to the present iPhone, all this is all. The same is true of turbines, but we know that there are countless dense harnesses running through the turbines, and while reducing the turbine space, we have to consider the safety risks of electrical insulation, when the heat shrink tube sits. However, the ordinary single-wall edimist tube inner layer without glue, seal insulation waterproof performance is far from shrinking double wall tube to come to good, to know that good sealing for engine performance improvement, fuel consumption rate reduction, operation and maintenance costs and so on have a great deal of good.

Here's how eco-miniature double wall tubes are used in wind turbines:

Let's introduce again, environmentally friendly double wall tube. Environmentally-friendly heat shrink double wall tube by radiation cross-linked polyolefin material and hot melt double layer composition, outer polyolefin insulation, flame retardant, physical and chemical electrical performance is excellent, the inner hot melt can buffer mechanical strain and sealstrong. The main functions are insulation, sealing, waterproof, anti-corrosion, anti-leak, etc. , widely used in various types of harnesses, wire and cable and metal pipe rods, such as seal insulation, waterproof corrosion and other fields.

环保热缩双壁管在风力涡轮机中的使用

环保热缩双壁管在风力涡轮机中的具体应用。首先我们来了解一下什么是涡轮机。

涡轮机是利用流体冲击叶轮转动而产生动力的发动机。可分为汽轮机、燃气轮机和水轮机。是广泛用做发电、航空、航海等的动力机。涡轮增压器实际上是一种空气压缩机，通过压缩空气来增加进气量。它是利用惯性冲力来增加发动机的输出功率。风力涡轮机则是利用风能转动叶片发电的发动机，其成本仅为常规涡轮机的一半。  

风力涡轮机为什么会使用到环保热缩双壁管。

我们都知道随着科技的发展，人们越来越追求精细化，从大屁股的台式电脑到几寸大小的笔记本，从以前的大哥大到现在的Iphone，无不如此。同样涡轮机也是如此，但是我们知道涡轮机里面贯穿了无数密密麻麻的线束，在缩小涡轮机空间的同时，我们不得不考虑电力绝缘的安全隐患，这时热缩管就起到了作用。然而普通的单壁热缩管内层不带胶，密封绝缘防水性能远没有热缩双壁管来的好，要知道良好的密封性对于发动机性能提高、燃油消耗率降低、运行和维修成本减少等方面有很大的好出。

下面是环保热缩双壁管在风力涡轮机中的应用：

我们再来介绍一下，环保双壁管。环保热缩双壁管由辐射交联聚烯烃材料和热熔胶双层构成，外层聚烯烃绝缘、阻燃、理化电气性能优异，内层热熔胶能缓冲机械应变和密封性强。主要功能是绝缘、密封、防水、防腐、防漏气等，广泛应用于各类线束、电线电缆和金属管棒等的密封绝缘、防水防腐等领域。