• English
  • 中文
News detailCurrent Location:Home > News > News detail

Application of PVDF heat shrink tube in the lamp industry

Time:2019/7/24 posted:Kehong Enterprises Co.,Ltd.

Kehong-PVDF heat shrink sleeve its uniform principle system uses light to pass through the medium of different refractive index, so that light produces many refractions, reflections, scattering, and obtains the effect of optical diffusion. The transmission rate can reach 85-93%, fog 95-99%, according to customer requirements of special processing production. Green: in line with the requirements of the EU RoHS Directive, and no traditional energy-saving lamps mercury and ultraviolet light pollution, energy-saving low-carbon.

The traditional fluorescent lamp, with us living for at least two generations, its bright color, low price, has been the first choice of ordinary families. Push a few years ago, dare to say that the family have fluorescent lights, not too much.

With the appearance of LED lights, a time there is a great replacement for the fluorescent lamp, but because the cost is too high, to achieve the same luminaire, the price is expensive, the general family is difficult to accept.

Can you take a median value, our traditional fluorescent lamp mode, a small number of LED lights, to achieve the same, or even performance beyond the fluorescent lamp "fluorescent lamp"?

After the company's research and development department of continuous testing, and a number of LED manufacturers of cooperation, Kehong Electronics Co., Ltd. finally produced a fluorescent tube for fluorescent lamps. The shrink tube is milky white. Of course, it can be other colors. Let's take the usual white as an example. The most important effect of the effect is not limited to insulation protection is the diffusion of luminescence. The principle structure is this: the role of the light diffusion heat shrink tube is to the LED fluorescent lamp point light source evenly converted into the surface light source, to achieve the effect of a uniform light.



PVDF热缩管在照明行业的应用

Kehong-PVDF热缩套管其匀光原理系利用光在不同折射率的介质中穿过,使光线产生许多折射、反射、散射,获得光学扩散的效果。透光率可以达到85-93%,雾度95-99%,可根据客户要求特殊加工制作。绿色环保:符合欧盟RoHS指令要求,且无传统节能灯的汞及紫外线等污染,节能低碳。

传统的日光灯,跟我们生活了至少二代人,它的光色亮丽,价格低廉,一直是普通家庭的首选。推前几年,敢说家家都有日光灯,一点也不为过。

随着LED灯的出现,一时间大有取代日光灯的架势,但是由于成本过高,达到同样光度,价格不菲,一般家庭都感到难于接受。

能否取个中间值,我们传统的日光灯模式,少量的LED灯,达到一样,甚至性能超越日光灯的"日光灯"呢?

经过公司研发部门的不断试验,和多家LED厂商的合作,Kehong电子有限公司终于生产出适用于日光灯的PVDF热缩管。该热缩管为乳白色。当然也可以是其他颜色。我们拿常用的白色来举例。功效不仅限于绝缘防护它的最重要的功效就是扩散发光。其原理结构是这样的:有助于光扩散热收缩管的作用是将LED日光灯的点状光源均匀转换成面光源,达到匀光的效果。


Pre:Use of eco-friendly shrink double wall tubes in wind turbines
Next:Application and characteristics of silicone tube
Print】【Close】【Back
Copyright © 2013-2020 Kehong Enterprises Co.,Ltd. All rights reserved