- High temperature resistant Clear FEP 200 heat shrink tubing
- 【Brief 】：
FEP heat shrink tubing has similar dielectric and frictional properties to PTFE heat shrink tubing. Except the Continuous operating temperature, FEP heat shrinkable tubing is suitable for continuous use at temperatures up to 200°C. But the begin shrink temperature of FEP tubing is just 170 °C, much lower than PTFE’s. This can be a significant advantage when used in conjunction with temperature sensitive components. The other advantage of FEP heat shrink tubing is that the max diameter of FEP heat shrink tubing we can produce is 215mm ID, much larger than PTFE’s.
- 【Series】：PTFE FEP Kynar Viton
- Product description
High temperature resistant Clear FEP heat shrink tubing
Features
1. Excellent insulation
2. Operating temperature -60oC ~ 200 oC
3. Not burn in the air (Oxygen Index>95vol%)
4. Excellent corrosion resistance
5. Low Friction: Dynamic friction coefficient 0.2-0.3
Tech Data:
Property(特性）
Test Method（测试方法）
Typical Performance（指标）
密度 Density
ASTM D792
2.12-2.17 g/cc
硬度 hardness shore D
55 D-65D
拉伸强度Tensile Strength(Mpa)
ASTM D638
19-22 Mpa
断裂伸长率 Elongation(%)
ASTM D638
300-400%
阻燃 flammability
UL 94
VW-0
吸水率 water absorption
ASTM D570
≤ 0.01%
导热率 thermal conductivity
ASTM C177
0.2 W/m-k
击穿强度 dielectric constant
short time ASTM D149
10kv/0.1mm
| ID pre-shrink |
ID（MM）post-shrink
|
Wall thickness after-shrink | length (M) |
| 2 | 1.6 | 0.15-0.2 | 1 |
| 3 | 2.2 | 0.15-0.2 | 1 |
| 4 | 3 | 0.2-0.25 | 1 |
| 4.5 | 3.3 | 0.2-0.25 | 1 |
| 5.5 | 4.3 | 0.2-0.25 | 1 |
| 7 | 5.1 | 0.2-0.35 | 1 |
| 8 | 6 | 0.2-0.35 | 1 |
| 10 | 7.4 | 0.2-0.45 | 1 |
| 12 | 8.8 | 0.2-0.45 | 1 |
| 14 | 10.7 | 0.2-0.45 | 1 |
| 19 | 16.5 | 0.2-0.45 | 2 |
| 24 | 19.5 | 0.2-0.45 | 2 |
| 30 | 24 | 0.2-0.45 | 2 |
| 33 | 27 | 0.2-0.45 | 2 |
| 35 | 28 | As you need | As you need |
| 40 | 31 | ||
| 45 | 35 | ||
| 50 | 39 | ||
| 55 | 43 | ||
| 60 | 46 | ||
| 70 | 54 | ||
| 75 | 58 | ||
| 80 | 62 | ||
| 90 | 70 | ||
| 100 | 75 | ||
| 150 | 120 | ||
| 215 | 180 |
