• English
  • 中文
News detailCurrent Location:Home > News > News detail

Cold and heat shrinkable cable accessories are standard

Time:2019/11/27 posted:Kehong Enterprises Co.,Ltd.

Main standards for cold shrinkable cable accessories and heat shrinkable cable accessories:

IEC Standard:

IEC62067 "Extruded insulated power cables with a rated voltage of 150 kV (Um = 170kV) or more to 500kV (Um = 550kV)

Power cable systems and their accessories-Test methods and requirements "

 IEC60840 "Extruded insulated power cables with rated voltages from 30kV (Um = 36kV) to 150kV (Um = 170kV) and

Annex Test Methods and Requirements

IEC60859 "Cable connection device for gas-insulated metal-enclosed switches with a rated voltage of 72.5kV and above"

IEC60502 "Extruded insulated power cables and accessories with a rated voltage of 1kV (Um = 1.2kV) or more and 30kV (Um = 36kV)"

Chapter 600: Type Test of Accessories in IEC60055 "Paper Insulated Metal Protective Jacks with Rated Voltage of 18 / 30kV and Below (with Copper or Aluminum Conductors, Excluding Compressed and Oil-filled Cables)" .

IEC61442 "Test method for power cable accessories with rated voltage from 6kV (Um = 7.2kV) to 30kV (Um = 36kV)".


National Standard (GB Standard)

GB / Z18890 "Rated voltage 220kV (Um = 250kV) XLPE insulated power cable and its accessories"

GB / T11017 《Rated voltage 110kV XLPE insulated power cable and its accessories》

GB5589 "Test method for cable accessories"

GB9327 "Test method for cable conductor compression and mechanical connection joints"

GB14315 "Crimping type copper and aluminum terminals and connecting pipes for cable conductors"

Note: GB11033 "Basic Technical Requirements for Power Cable Accessories with Rated Voltage of 26 / 35kV and Below" has been delegated to JB / T8144


Industry Standard:

JB Standard (Standard of Machinery Industry Association)

JB / T8144 "Basic Technical Requirements for Power Cable Accessories with Rated Voltage of 26 / 35kV and Below" Original GB11033

JB6464 "Straight-wrap-type connector for power cables with rated voltage of 26 / 35kV and below"

JB6465 "Indoor and Outdoor Porcelain Sleeve Terminals for Power Cables with a Rated Voltage of 26 / 35kV and Below"

JB6466 "Indoor and Outdoor Porcelain Jack Terminals for Power Cables with Rated Voltage of 8.7 / 10kV and Below"

JB6468 "Indoor and Outdoor Wrapped Terminal for Power Cables with Rated Voltage of 8.7 / 10kV and Below"

JB7829 "Indoor and Outdoor Heat Shrinkable Terminals for Power Cables with a Rated Voltage of 26 / 35kV and Below"

JB7830 "Straight-through heat shrinkable connector for power cable with rated voltage of 26 / 35kV and below"

JB7830 "Straight-through heat shrinkable connector for power cable with rated voltage of 26 / 35kV and below"

JB7831 "Indoor and Outdoor Pouring Terminals for Power Cables with Rated Voltage of 8.7 / 10kV and Below"

JB7832 "Straight-through, cast connector for power cables with rated voltage of 8.7 / 10kV and below"

JB / T8501.1 "Plastic insulated power cables with a rated voltage of 26 / 35kV and below, indoor and outdoor prefabricated connectors"

JB / T8503.2 "Indoor and Outdoor Prefabricated Connectors for Plastic Insulated Power Cables with a Rated Voltage of 26 / 35kV and Below"

KeHong Enterprises Co.,Ltd.
www.gzhelectric.com
www.khenterprise.en.alibaba.com
E -mail:gavin@gzhelectric.com
Tel:+86-20-82586869, Mobile: +8615918777767
Wechat:008615918777767
Skype:gonggulily

冷热缩电缆附件有哪些标准

冷缩电缆附件和热缩电缆附件主要用的标准:

IEC标准:

IEC62067《额定电压150 kV(Um=170kV)以上至500kV(Um=550kV)挤出绝缘电力电缆

及其附件的电力电缆系统——试验方法和要求》

IEC60840《额定电压30kV(Um=36kV)以上至150kV(Um=170kV)挤出绝缘电力电缆及其

附件试验方法和要求》

IEC60859《额定电压72.5kV及以上气体绝缘金属封闭开关的电缆联接装置》

IEC60502《额定电压1kV(Um=1.2kV)以上至30kV(Um=36kV)挤出绝缘电力电缆及其附件》

IEC60055《额定电压18/30kV及以下纸绝缘金属保护套(带有铜或铝导体,但不包括压气和充油电缆)》第1部分“电缆及附件试验”中第七章:附件的型式试验。

IEC61442《额定电压6kV(Um=7.2kV)到30kV(Um=36kV)电力电缆附件试验方法》。


国家标准(GB标准)

GB/Z18890《额定电压220kV(Um=250kV)交联聚乙烯绝缘电力电缆及其附件》

GB/T11017《额定电压110kV交联聚乙烯绝缘电力电缆及其附件》

GB5589《电缆附件试验方法》

GB9327《电缆导体压缩和机械连接接头试验方法》

GB14315《电缆导体用压接型铜、铝接线端子和连接管》

注:GB11033《额定电压26/35kV及以下电力电缆附件基本技术要求》已下放为JB/T8144


行业标准:

JB标准(机械行业协会标准)

JB/T8144《额定电压26/35kV及以下电力电缆附件基本技术要求》原GB11033

JB6464《额定电压26/35kV及以下电力电缆直通型绕包式接头》

JB6465《额定电压26/35kV及以下电力电缆户内型、户外型瓷套式终端》

JB6466《额定电压8.7/10kV及以下电力电缆户内型、户外瓷套式终端》

JB6468《额定电压8.7/10kV及以下电力电缆户内型、户外绕包式终端》

JB7829《额定电压26/35kV及以下电力电缆户内型、户外型热收缩式终端》

JB7830《额定电压26/35kV及以下电力电缆直通型热收缩式接头》

JB7830《额定电压26/35kV及以下电力电缆直通型热收缩式接头》

JB7831《额定电压8.7/10kV及以下电力电缆户内型、户外浇注式终端》

JB7832《额定电压8.7/10kV及以下电力电缆直通型、浇注式接头》

JB/T8501.1《额定电压26/35kV及以下塑料绝缘电力电缆户内型、户外型预制装配式接头》

JB/T8503.2《额定电压26/35kV及以下塑料绝缘电力电缆户内型、户外型预制装配式接头》

Pre:Construction points of cold shrink cable accessories
Next:The impact of raw materials on the performance of cold shrink cable accessories
Print】【Close】【Back
Copyright © 2013-2020 Kehong Enterprises Co.,Ltd. All rights reserved