The heat shrinkable identification tube is widely used as a package for electrolytic capacitors, electronic devices, batteries, and the like, and is particularly used on an outer casing of an electrolytic capacitor. This sleeve can also be printed.

The heat shrinkable identification tube is simple in process and does not require a mold. Different thickness guide wires can be used with different diameter sleeves, which is convenient to use.

The sleeve will not fall off after being placed on the sleeve. There is no possibility that the aluminum label sheet will loosen and cause a shell or short circuit.

Heat shrink tubing is low cost.

The heat shrinkable sleeve is aesthetically pleasing and does not consume non-ferrous metals.

In addition, it can also be used as the protection of the motor shaft extension. When the motor is shipped from the factory, it is placed on the shaft extension. After being heated and contracted, it is tightly wrapped around the shaft extension and the flat key. It is more advanced than the plastic paper wrapping, especially for the surface paint. It is more convenient to use on lacquered motors.

Our factory used the heat-shrinkable identification tube produced by Kehong Electronics Co., Ltd. as the line end mark of the motor lead-out line on the 1.5-kilowatt four-pole special motor for the large-scale coal mine fan produced by the South Coal Machine Plant, replacing the commonly used aluminum. Quality label.

热缩标识管对电机中线束的标识

热缩标识管广泛地用作电解电容、电子器件、电池等的封装,特别是用在电解电容的外壳上。这种套管也可以印字。

热缩标识管工艺简单,不需要模具。不同粗细的引接线可用不同直径的套管,使用方便。

套管套上后不会脱落。没有铝标号片松动造成碰壳、短路的可能。

热缩套管成本低。

热缩套管美观醒目不耗用有色金属。

另外,它也可用作电机轴伸的保护,电动机出厂时套在轴伸上,经加热收缩后紧紧包在轴伸和平键上,比用塑料纸包扎美观先进,特别是表面油漆用烘漆的电机上使用更为方便。

我厂在为南方煤机厂生产的煤矿大型风机1.5千瓦四极专用电机上,采用了柯鸿电子有限公司生产的热缩标识管,作为电机引出线的线端标志,代替了通常所用的铝质标号片。