In fact, the heat shrinkable tube is the heat shrinkage pipe, according to the composition of materials and temperature resistance can be divided into PVDF heat shrinkable tube, PTFE heat shrinkable tube, pet heat shrinkable casing, FEP heat shrinkable tube, 10KV high-pressure mother row protection heat shrinkable casing, PVC heat shrinkable casing, adhesive double-walled heat shrinkable casing, irradiated crosslinked pe heat shrinkable casing, 35KV High Voltage masterbatch protection heat shrinkage casing, imitation wood grain heat shrinkage casing and so on.

The bare masters in all distribution cabinets need to be fitted with heat shrinkable tubes, generally installed in the factory, at the same time the distribution cabinet equipment components installed, the need to put the heat shrinkable pipe first on the master row, and so on all components after installation, the screws fastened, heat shrinkable pipe flattened, placed in a suitable position, with hot air heater will heat shrink tube heat shrinkage on the bus can be. A batch heat shrinkage can also be used in the oven. The oven is set to the temperature according to the characteristics of hot shrinkage pipe, and the hot shrinkage tube is arranged uniformly on the online beam link, and the protection and insulation of the connection point can be completed by putting it into the oven in batches.

热缩管是遇热立即收缩管材的统称

其实热缩管是遇热即热缩管材的统称，按组成材料和耐温程度的高低可分为PVDF热缩管、PTFE热缩管、PET热缩套管、FEP热缩管、10KV高压母排保护热缩套管、pvc热缩套管、含胶双壁热缩套管、辐照交联PE热缩套管、35KV高压母排保护热缩套管、仿木纹热缩套管等。

所有配电柜里的裸露母排需要加装热缩管,一般在厂里安装好，同时进行配电柜内设备元件的安装，需要将热缩管首先套在母排上，等所有元件安装完毕后，将螺丝紧固、热缩管铺平，摆放在适合的位置，用热风加热器将热缩管热缩在母线上即可。也可用烤箱成批次热缩。将烤箱按热缩管材质特点设定温度，在线束链接点上统一先套好热缩管，分批次放入烤箱即可完成对连接点的保护绝缘。